When storing Huaquan generator set in low-temperature environments, the following key points should be noted to ensure the performance of the units and extend their service life. I hope the following introduction can provide users with reference.
1、 Preparation before storage of Huaquan generator set
Comprehensive inspection and cleaning:
Before storage, the generator set should be inspected to ensure that it is in good condition.
Clean the surface and interior of the Huaquan generator set, remove impurities such as dust and oil stains, and keep the unit dry.
Replace with lubricating oil of appropriate quality:
Use lubricating oil suitable for low-temperature environments to ensure that the unit can still lubricate normally at low temperatures.
Drain the coolant from the water tank:
When the temperature is below 4 ℃, the cooling water in the diesel engine cooling water tank should be drained to prevent the cooling water from freezing and expanding, and damaging the radiator of the water tank.
2、 Requirements for Storage Environment of Huaquan Generator Sets
Temperature and humidity control:
The storage location should maintain appropriate temperature and humidity to avoid adverse factors such as overcooling, overheating, and humidity affecting the unit.
Excessive humidity may lead to a decrease in the insulation performance of the generator, and even affect the usability of the unit. Therefore, it is necessary to keep it dry or use a heating and dehumidification device.
Avoid rain and sun exposure:
The storage location should be able to withstand rain and sun exposure to reduce natural erosion of the Huaquan generator set.
Security precautions:
The storage location should ensure that the unit is not hit by trees or objects to prevent damage.
Keep away from flammable and explosive materials and equip with corresponding fire-fighting measures, such as placing ABC level fire extinguishers.
3、 Huaquan Generator Battery Management
Storage and maintenance of batteries:
Lead acid high-energy batteries should be protected from direct exposure to sunlight or rain during storage.
If electrolyte has been added, it should be fully charged every 5 to 8 weeks to avoid battery damage or reduced usage time.
4、 Regular inspection and maintenance
Check the status of the Huaquan generator set:
During storage, the unit should be regularly inspected for damage, oxidation of electrical components, and loose connections.
Keep dry and clean:
The surface and interior of the unit should be kept dry and clean to avoid the accumulation of dust and oil stains.
Preparing to start:When it is necessary to start the Huaquan generator set, the status of the unit should be checked in advance to ensure sufficient oil, coolant, etc., and the unit should be preheated to improve the success rate of starting.
In summary, when storing Huaquan generator sets in low-temperature environments, it is necessary to pay attention to various aspects such as preparation before storage, storage environment requirements, battery management, and regular inspection and maintenance. These measures help ensure that the unit remains in good condition during storage and can be smoothly started and operated when needed.
More information on Huaquan generator sets:http://www.huaquan66.com/
